1 / 3
Motorola Talkabout T460 Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mount holder for Motorola Talkabout model T460
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 64
- Makes
- 0
- Views
- 422
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
Wall mount holder remixed for Motorola Talkabout T460 frs radios
adjustments from original model:
- flipped side for charge port access
- scaled up
- adjusted cutouts
- useless height removed
- mounting holes added
Two versions available in .stl for either screw mount (4.2mm holes) or pin nail mount (1.3mm holes). Adjust parameter “D_ScrewHole” in the fusion file if neither of these work for the screws you want to use.
Notes:
- Tolerances are loose, which is fine for upright design in a static environment. If adapting for in-vehicle or van mount you'll probably want to test and scale down accordingly.
Print settings:
- layer height: 0.22mm
- nozzle: 0.4mm
- Material: PETG (any non-flexible material is probably fine - its only 15g of filament so start with whatever you have loaded as waste is of little concern)
- Depending on bridging capabilities, may need support for front cutout. Higher fan speed mostly did the trick for me (set to higher fan speed at height before bridge)