Big Tree Tech Smart Filament Sensor V2 NEMA 17 Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
BTT Smart Filament Sensor V2 NEMA 17 stepper motor hole mount.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 143
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a mount with 2 securing points for the BTT Smart Filament Sensor V2. The mount is meant to interface with the NEMA 17 mount (bowden extruder motor) that is now unoccupied due to a direct drive conversion.
Required Hardware:
M3 Bolts | x3
M3 Nuts | x3
M3 Bolts | x2 | Should be included with the smart filament sensor
MOTIVATIONS:
I use fireproof fabric enclosure for my ender 3 so I needed an on printer filament detection location. The x-axis gantry is perfect as I can run a bowden from the sensor to the toolhead with a decent curvature.
REMIXING AND MODIFICATIONS:
I have included all Solidworks files and they're fully dimensionally parametric so feel free to pop into the equations page and modify some values.
(The geometry isn't fully parametrically constrained for some aspects. You may need to modify additional values as it isn't designed to scale using singular inputs automatically.)
(If you do not have Solidworks, I highly recommend Onshape, it is a great alternative with a more modern GitHub-like version control system and accepts Solidworks files for conversion while retaining part change history.)