Cable Tag Generator (OpenSCAD)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.06 – €0.07 net (excluding VAT)
For file: clamp 10x4.5_0.4n_0.2mm_PLA_MK4_4m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.07 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 3.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Make your own custom tags for various cables/cords.
- Rating
- 5 / 5
- Likes
- 217
- Downloads
- 509
- Makes
- 2
- Views
- 3,239
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Use this OpenSCAD generator to make custom tags for your cables.
You can customize just about everything:
- The length, width, and height of the tag
- The font – name, size, and style
- The diameter, width, and thickness of the clip
Just measure the diameter of the cable and decide what the tag should show. Then print and snap together.
I printed my tags in 2 color. The clip is printed on its side, so no support is needed.
I have included several clip sizes and an assortment of tags.
Use the customizer in OpenSCAD to create your own. If you are unfamiliar with OpenSCAD or its customizer, I have included a little tutorial I made.
Update
If you prefer a different style, I have published a Tag Maker.
