MK3/S/+ LCD SD Card Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Keeps your SD cards handy.
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 132
- Makes
- 3
- Views
- 935
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a SD card holder built right into you LCD cover for quick easy storage of SD cards.
Does need some supports but they are already designed for you.
Nozzle: 0.4 (Doesn't really matter but that is what I use)
Layer height: 0.3(Draft) works great, I think it is what Prusa uses but any thing will work.
Filament: PETG(recommended) PLA(works fine as well)
Orientation: Face down
Installation is really simple just follow the direction here https://help.prusa3d.com/en/guide/6-lcd-assembly_172423
If you have any question, comment, or suggestion feel free to share.
Enjoy printing and be sure to leave a make and like if you appreciate it.
P.S. Depending on how your LCD is mounted you may not be able to use the top 1 or 2 slots because of how the print bed comes out over. They are sort of for aesthetics and not as much for use. Also you may notice the bottom slot is shallower than the rest. It had to be that way so that the SD card would not fall through.