Chinese Dragon Festival Themed HueForge Painting
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Chinese Festival Themed HueForge Painting
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 25
- Makes
- 0
- Views
- 211
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
I went a little overkill on the colors. I'm sure you can still get good results with just black, red, orange and yellow but the more shades the better blending!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA HATCHBOX BLACK Transmission Distance: 0.5
PLA HATCHBOX BROWN Transmission Distance: 2
PLA YEETIN MAROON Transmission Distance: 5.5
PLA YEETIN RED Transmission Distance: 5.5
PLA SUNLU RED Transmission Distance: 9.6
PLA HACKERSPACE DARK RED ORANGE Transmission Distance: 6
PLA HACKERSPACE ORANGE Transmission Distance: 10
PLA SUNLU ORAGNGE Transmission Distance: 10
PLA Generic Dark Yellow Transmission Distance: 12
PLA SUNLU YELLOW Transmission Distance: 12
PLA YEETIN PALE YELLOW Transmission Distance: 13
Swap Instructions:
Start with BLACK
At layer #9 (0.8mm) swap to BROWN
At layer #13 (1.12mm) swap to MAROON
At layer #14 (1.2mm) swap to RED
At layer #17 (1.44mm) swap to RED
At layer #18 (1.52mm) swap to DARK RED ORANGE
At layer #21 (1.76mm) swap to ORANGE
At layer #25 (2.08mm) swap to ORAGNGE
At layer #30 (2.48mm) swap to Dark Yellow
At layer #32 (2.64mm) swap to YELLOW
At layer #40 (3.28mm) swap to PALE YELLOW for the rest.
