Chinese Dragon Festival Themed HueForge Painting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Chinese Festival Themed HueForge Painting
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 211
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
I went a little overkill on the colors. I'm sure you can still get good results with just black, red, orange and yellow but the more shades the better blending!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA HATCHBOX BLACK Transmission Distance: 0.5
PLA HATCHBOX BROWN Transmission Distance: 2
PLA YEETIN MAROON Transmission Distance: 5.5
PLA YEETIN RED Transmission Distance: 5.5
PLA SUNLU RED Transmission Distance: 9.6
PLA HACKERSPACE DARK RED ORANGE Transmission Distance: 6
PLA HACKERSPACE ORANGE Transmission Distance: 10
PLA SUNLU ORAGNGE Transmission Distance: 10
PLA Generic Dark Yellow Transmission Distance: 12
PLA SUNLU YELLOW Transmission Distance: 12
PLA YEETIN PALE YELLOW Transmission Distance: 13
Swap Instructions:
Start with BLACK
At layer #9 (0.8mm) swap to BROWN
At layer #13 (1.12mm) swap to MAROON
At layer #14 (1.2mm) swap to RED
At layer #17 (1.44mm) swap to RED
At layer #18 (1.52mm) swap to DARK RED ORANGE
At layer #21 (1.76mm) swap to ORANGE
At layer #25 (2.08mm) swap to ORAGNGE
At layer #30 (2.48mm) swap to Dark Yellow
At layer #32 (2.64mm) swap to YELLOW
At layer #40 (3.28mm) swap to PALE YELLOW for the rest.
