Neutrik NA enclosure mount for K&M Microphone Stand Boom Arm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a mount which magnetically attaches a Neutrik NA multipurpouse enclosure to the joint of a K&M microphone stand.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 16
- Makes
- 0
- Views
- 417
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
I needed a microphone stand mounted inline switch for a microphone. I built it into a Neutrik NA extruded aluminum enclosure (it's also available printable). This print surrounds the outside of the aluminum housing. The lower half takes a bit of effort to snap in. 4x 4-40 screws go through the Neutrik D-Series connectors, through the print, into the extruded aluminum. I included 8 holes in the print, but only two per side are required.
There are spots for up to 10x 10mm x 1.75mm magnets if you want it extra secure. You could also just wrap some gaff tape around it. :)