1 / 2
A washer for nails
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you need a larger head for your finish nail or other nails, this washer will do the trick.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 33
- Makes
- 0
- Views
- 150
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
These washers are to use with nails that you want to have a larger head. Good for mounting things to the wall or acting as a spacer.
** added thicker 2mm washers
Dimensions:
1cm washers:
- Diameter: 1 cm
- Nail hole diameter: 2 mm
- Nail hole chamfer: .5 mm
1.5cm washers:
- Diameter: 1.5 cm
- Nail hole diameter: 2 mm
- Nail hole chamfer: .5 mm
Print Settings:
I used PLA but ABS filament would be more durable.
Infill: Because this part is so thin, infill percentage and pattern shouldn't affect the print if the same top/bottom settings are used.
Top/bottom: 0.8 mm thickness, 4 layers
Walls: 0.8mm thick, 2 layers
Adhesion: Heated bed, 3mm Raft