YubiCoffin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple casing for YubiKey 5 and YubiKey 5C
- Rating
- 4.5 / 5
- Likes
- 18
- Downloads
- 201
- Makes
- 4
- Views
- 987
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
YubiCoffin
To serve and protect.
A simple and well-working casing for your YubiKey 5/5C hardware keys. Just print it directly on the build plate with no supports. Or be cool, add a pattern on top, and print your model in opposite orientation using supports.
Tested with PLA on a Prusa MK4 with settings:
- 0.10mm FAST DETAIL
- Generic PLA
- Original Prusa MK4 Input Shaper 0.4 nozzle
- Supports: None/Everywhere
- Infill: 100%
- Fill pattern: Rectilinear
- Print Settings > Advanced > Fill angle: 0
If you want smoother finishing: Print Settings > Ironing > Enable ironing. The measurements (allowances) have been tested and proven having a snug fit on the MK4 with settings above, but maybe, if you use a different printer or material, you may need to manually change some measures (please comment!); if you need a tighter fit: Stick some (soft) tape on the inside.
Blender project included for your convenience.
Peace.