AWCY 3D TACTICAL 2A PRO AR JIG - READYMILL 15MM TO 1/4" OR 5/16" ADAPTER BUSHING AND SPACERS
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you can't find the 5D Tactical READYMILL 5/16 endmill, use 1/4". Aluminum bushings need to be changed out for .25 OD
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 91
- Makes
- 0
- Views
- 878
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
AWCY 3D TACTICAL 2A PRO AR JIG READYMILL 5/16" TO REGULAR ¼" BIT ADAPTER KIT
If you have printed the jig you may not be able to readily find the READYMILL adapter and 5/16 endmill tools that are designed to fit it… You may have noticed a lot of "OUT OF STOCK" notices.
This is my attempt to adapt a 1/4" endmill/router/some other bit for use in the jig.
If you have the 6002-Z bearing in your router plate - the bushing steps down from the 15mm ID of the 6002-Z to 1/4".
This version is slightly tighter and longer - 15mm-to-quarter-in-bushing-only_0.4n_0.2mm_PLA_MK4_20m
Also added 5/16" bushing
Also provided the 3 sizes of printable bushings, because those will need to change to 1/4" OD.
The originals specified are 8mm, which is ~5/16 - your milled out lower interior will end up
about 1/16" too narrow if you use the 8mm spacers and a 1/4" bit.
( I do not have much faith in printing these small/narrow bushings… The vertical ones printed fine on my printer and tracked in the guide just fine. YMMV. Maybe the hardware store has nylon ¼ OD x .166 ID bushings that can be filed and fit. Also, the 8-32 inserts may cause an alignment problem if their holes are bigger than .25 - may fall into or askew in the hole)
These are the aluminum 1/4" spacers that you can purchase from McMaster.
ALL 1/4" OD x .166 ID:
Bushing Step 1 - 5/32" - PN: 92510A032
Bushing Step 2 - 5/16" - PN: 92510A463
Bushing Step 3 - 1/2" - PN: 92510A465
ALSO NOTE: The screw head diameter of the 2 screws specified in the AWCY Jig instructions to hold the 8mm aluminum step bushings are .27in. These 2 screws head diameter needs to be ground down to less than (or equal…) to .25in . The .02 may not make a difference,
Chuck the screws in a drill and run them against a file or bench grinder, etc.
Original screws - PN: 90665A114
Alloy Steel Low-Profile Socket Head Screws, Hex Drive, Zinc Plated, 8-32 Thread Size, ¾" Long