Charger Holder for Bosch BPC3400 Charger (4 Amperes)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I found the basic charger in Printables. Reworked a bit and added a plugholder on the side.
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 188
- Makes
- 2
- Views
- 1,080
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
For my bike charger I found a.m. charger wallmount. The basic function (holding 4A-charger and mains cable) were excellent.
I added a plug holder sidewards for the battery plug. So everything is safe!
After installation I saw that the Bosch logo was showing upside down, so I created from Bosch website their logo which I printed with my MK3s and MMU2s and applied with 3M-VHB acrylic foam tape. This is without remainding stains 100% removable if needed.
Here some printing instructions (for Prusa Slicer):
- We have three stl files: the basic holder, the plug holder, the frog pads.
- In case you want to print all three at once load the basic holder on your buildplate and then via "editing → add part → load part" you add the two other files. In this case all parts are oriented correctyl to each other. Otherwise the plug is lying on the build plate.
- OR: just select “Bosch Charger Wallmount_Main(1) = without frog pads or
(2) = everything”
- Additionally I added two other files with plug holder integrated and one with frog pads for better bed adhesion if you print like this.
Here the logo: https://www.printables.com/de/model/774535-bosch-logo-for-my-ebike-charger
Have fun with your bike.
Drive safely with your bike and always pay attention to any kind of traffic. It is not really undangerous!
Explore my other Printables: https://www.printables.com/de/@Tritschi