Samsung Galaxy S24 Hexagon AI case v2 - KI Smartphone
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my second Samsung Galaxy S24 case with S24... AI Text - a remix from lucas_sp12. No support required.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 216
- Makes
- 0
- Views
- 1,480
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my second Samsung Galaxy S24 case with S24... AI Text - a remix from lucas_sp12.
No support is required in the slicer settings :-)
The green parts in the picture are the supports for easy printing and must be removed after. Removing can be easy or difficult depending on material and printer.
I use filament TPU shore 95A and the Prusaslicer project file, nozzle: 220 °C, bed: 50 °C.
New version v2.0 changes to v1.0: The entire housing is 0.2 mm thicker and therefore more stable. Volume button cutout adjusted slightly. The microphone holes are a little larger so that it fits better. The Support is a little thinner so it can be removed more easily. Now with "S24 Galaxy AI" Text :-)
See also Hexagon version 1 without text --> https://www.printables.com/de/model/766596
and Voronoi + OrganicLoop version 3 --> https://www.printables.com/de/model/845230
and new Halloween version 1 --> https://www.printables.com/de/model/1006336
Happy Printing
Toni
----------------------------------------------------------------------------------------------------------------
Dies ist meine erste Samsung Galaxy S24 Hülle mit S24... KI Text - ein Remix von lucas_sp12.
In den Slicer Einstellungen ist keine Unterstützung erforderlich :-)
Die grünen Teile im Bild dienen lediglich als Stützen zum einfachen Drucken und müssen anschließend entfernt werden. Das Entfernen kann je nach Material und Drucker einfach oder schwierig sein. Ich benutzte Filament TPU shore 95A und die Prusaslicer Projektdatei, Düse: 220 °C, Bett: 50 °C.
Neue Version v2.0 Änderungen zu v1.0: Das gesamte Gehäuse ist 0,2 mm dicker und dadurch stabiler. Der Ausschnitt der Lautstärketaste wurde leicht angepasst. Die Mikrofonlöcher sind etwas größer, damit es besser passt. Der Support ist etwas dünner, sodass er leichter entfernt werden kann. Jetzt mit "S24 Galaxy KI" Text :-)
Siehe auch Hexagon Version 1 ohne Text --> https://www.printables.com/de/model/766596
und Voronoi + OrganicLoop Version 3 --> https://www.printables.com/de/model/845230
und neue Halloween Version 1 --> https://www.printables.com/de/model/1006336
Viel Spaß beim Drucken
Toni
Category: Mobile Phone