Cirqus Voltaire Bumper Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printable replacement part for NLA rubber bumper bracket (04-10253) used on Bally Cirqus Voltaire pinball machines.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 19
- Makes
- 0
- Views
- 158
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
I printed it with full infill and it has been holding up fine for a few months. You will need an M3 tap to create the threads but the pilot hole is sized properly so you can just run a tap through it. You'll also need a 10mm long M3 screw. The boss that pokes down inside the rubber bumper makes for a pretty long thread section so the screw engagement is quite strong. The thicker shape does not interfere with the ball passing behind/near the bracket.
Also, for completeness I used P/N 23-6766 from Marco Pinball for the blue bumper itself.