Grateful Dead Magnet - Steal Your Face
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Grateful Dead Steal Your Face Magnet. Magnet has four embedded 6x3 magnets. Multiple colors but no MMU or AMS necessary.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 191
- Makes
- 1
- Views
- 509
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Summary:
Grateful Dead Steal Your Face Magnet. This 3 inch (76mm) diameter magnet has four embedded 6x3 magnets. Multiple colors but no MMU or AMS necessary.
Print settings:
PLA, 0.4 nozzle, 0.2 layers, 2 walls, 10% gyroid infill, classic wall
Magnets:
Designed for four 6x3 magnets. My magnets actual measurement was 6.0mmx2.5mm so the magnet hole is 6.3x2.8. I paused on the top magnet cavity layer and super glued the magnets in before resuming the print.
Filament changes:
Color order for filament changes: white, red, blue, black
If you stick with 0.2 layer heights:
- Layer 17 insert magnets
- Layer 20 change from white to red
- Layer 23 change from red to blue
- Layer 26 change from blue to black
*Be sure to double check your slicer for layer pauses
Links to other Grateful Dead Magnets:
- Dancing Bear 1: https://www.printables.com/model/775348-grateful-dead-dancing-bear-magnet-1-of-5
- Dancing Bear 2: https://www.printables.com/model/775362-grateful-dead-dancing-bear-magnet-2-of-5
- Dancing Bear 3: https://www.printables.com/model/775380-grateful-dead-dancing-bear-magnet-3-of-5
- Dancing Bear 4: https://www.printables.com/model/775386-grateful-dead-dancing-bear-magnet-4-of-5
- Dancing Bear 5: https://www.printables.com/model/775401-grateful-dead-dancing-bear-magnet-5-of-5
- Steal Your Face: https://www.printables.com/model/774835-grateful-dead-magnet-steal-your-face