Simple Filament Respooler For Drill
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple model to transfer filament from one spool to another.
- Rating
- 5 / 5
- Likes
- 240
- Downloads
- 3,407
- Makes
- 11
- Views
- 13,337
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
I recently needed to respool a spool of filament because the original spool wasn't compatible with the Bambu Lab AMS. All already existing models needed some additional hardware, which I just didn't wanted to bother getting. Thus I created my own design. It only needs the two printed parts and a regular hexagonal pencil. Simply clamp the new spool between the who parts and stick a pencil through the hole. The pencil which I used is about 7mm thick (between flats). This seems to be quite a common size, at least here in Europe. Than just mount the pencil in an electric drill and put the old spool onto a filament holder. Than just spin up the drill and start spooling. While respooling make sure to guide the filament with a small piece of PTFE tube. The windings don't look perfect but it certainly works if you just occasionally need to respool a roll of filament.
This is what the finished spools look like:
