Simple Filament Respooler For Drill
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple model to transfer filament from one spool to another.
- Ocena
- 5 / 5
- Polubienia
- 240
- Pobrania
- 3407
- Wydruki
- 11
- Wyświetlenia
- 13 337
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I recently needed to respool a spool of filament because the original spool wasn't compatible with the Bambu Lab AMS. All already existing models needed some additional hardware, which I just didn't wanted to bother getting. Thus I created my own design. It only needs the two printed parts and a regular hexagonal pencil. Simply clamp the new spool between the who parts and stick a pencil through the hole. The pencil which I used is about 7mm thick (between flats). This seems to be quite a common size, at least here in Europe. Than just mount the pencil in an electric drill and put the old spool onto a filament holder. Than just spin up the drill and start spooling. While respooling make sure to guide the filament with a small piece of PTFE tube. The windings don't look perfect but it certainly works if you just occasionally need to respool a roll of filament.
This is what the finished spools look like:
