1 / 5
Allen key holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holder for Allen keys size 1,5 - 10mm.
- Rating
- 4.5 / 5
- Likes
- 24
- Downloads
- 237
- Makes
- 2
- Views
- 1,777
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Object description:
Allen key holder for size 1,5 / 2 / 2,5 / 3 / 4 / 5 / 6 / 8 / 10mm.
The model is supplied in two versions.
- Version 1 - with 2 constrictions in each hole. In this version the Allen keys are securely held in every position, e.g. in horizontal position or even upside down.
- Version 2 - without constrictions. The preferred version when the holder is mounted on the wall.
The Allen keys are held securely by 2 constrictions in each hole.
The holder can be screwed on a wall with 3,5mm wood screws or 3mm metric screws with a washer.
You can also put it on a gridfinity holder which is available here:
| Gridfinity base for this Allen key holder: | Allen key base |
Other gridfinity models using the same sidemounting system for the magnets:
| Description | Link |
|---|---|
| Gridfinity bases: | Bases |
| Gridfinity bins: | Bins |
| Gridfinity AA-Battery holder, normal & vasemode: | AA-Battery holder |
| Gridfinity AAA-Battery holder, normal & vasemode: | AAA-Battery holder |
| Gridfinity for Ruthex threaded insert tips: | Ruthex tips holder |
| Gridfinity holder for drill bit box: | Drill bit box holder |
Recommended print settings:
Material: PETG, ASA/ABS.
Resolution: 0,2mm
Infill: 15%
Perimeter: 2
Brim: no
Support: no