1 / 5
Dummy Li-Ion batteries - 18650, 21700, 26650 & 26700 - Fast printing — image 1
1 / 5

Dummy Li-Ion batteries - 18650, 21700, 26650 & 26700 - Fast printing

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Dummy batteries to safely test and design your battery related projects. Don't get electrocuted, use plastic batteries.

Rating
5 / 5
Likes
18
Downloads
410
Makes
1
Views
1,206
Reviews
1

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution

This is a set of dummy batteries, on each of:

  • 18650 with button on top (yellow)
  • 21700 flat top (green)
  • 26650 flat top (white)
  • 26700 flat top (blue)

I use these to make battery enclosures etc. They are safer than using real batteries, which can deliver a lot of current, particularly in battery packs.

These are 100% electrically neutral, so even if you put them in the wrong way, your circuits will be fine!   ;)

Print

Nothing special here, use what you feel is right. I used:

  • Layer height: 0.3mm
  • No walls: 3
  • Infil: Cubic
  • Infil %: 20
  • Skirt: Yes
  • Brim: No

I did not need a brim even when printing multiple copies at the same time.

Material

PLA or PETG will be fine. If they are only for testing in enclosures you are creating, then PLA is fine.

If you need them to be strong, for mechanical reasons, then PLA is OK, but you might need more infill or an extra perimeter.

Notes

These are dimensionally accurate, there is no fake wrap around the top and bottom, but the button on the top, that you need is correct.

These print quite quickly, as they are not overly fussy. The goal was to have enough that I could print enough to use instead of real batteries. Experimenting with 10+ at a time didn't look sensible. Be safe, use dummy batteries.

Tags