1 / 3
nRFBox Case DIY
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I've made a concept of nRFBox that used OLED display, and nRF24.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 47
- Makes
- 0
- Views
- 773
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
So I made a nRFBox, since I made it like raw on breadboard, so to make it compact, I made the case.
Here is what I used for the device:
- 1x nRF24l01.
- x4 Tactical Push buttons.
- 2.4Ghz Antenna.
- Switch.
- 110 mAh Battery.
- C-Type TP4056.
- 0.96 inch llC serial 4pin Display module.
- atmega328p (Recommended as it's what I used + small)
- Screws 3.0mm x 16.mm
Flashing & Wiring
For flashing and wiring visit: https://github.com/cifertech/nRFBox
Printing
Support: No.
Addhesion: No.
Filament: Any you like, I used ABS.
Quality: 0.16mm.