1 / 4
Kossel Delta E3D V6 Mount with Berd-Air Tube Mount — image 1
1 / 4

Kossel Delta E3D V6 Mount with Berd-Air Tube Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Simple mounting collar for an E3D hotend to a basic Delta effector.

Rating
0 / 5
Likes
7
Downloads
47
Makes
0
Views
1,857
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

Simple mounting collar for an E3D hotend to a basic Delta effector. This extends out the side and allows the mounting of a Berd-Air Cooling tube for part cooling.

There are slots to add nuts for the bolts to attach the opposite side.

You'll need a couple of other parts to complete the mount:

2 - 3x14mm or 3x16mm bolts
2 - 3mm hex nuts or square nuts
Berd-Air Cooling tube

*Optional but HIGHLY recommended: V6 Silicon Sock.

Print instructions

Shouldn't require any supports.

Print out of a 'mechanical' filament (PETG, ASA, Nylon, etc).

Print External Perimeters to internal to preserve tolerances.

DO NOT OVER-TIGHTEN THE CLAMP ON TO THE TUBE! You will crush it.

Tags