Command Zone v1
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.78 – €3.40 net (excluding VAT)
For file: Command_Zone_v1_0.4n_0.15mm_PLA_MK4IS_2h38m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.09 excluding VAT (range midpoint).
- Weight reported by the author
- 48 g
- Print time reported by the author
- 2.64 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a command zone for you MTG commander plus 3 slide out trays for various spin down dice.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 423
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Share Alike
This model is a command zone box in which you can place you commander as well as slide in trays underneath to slide out and use Spindown sized dice. The file includes 3 trays although only two will fit in the model at one time. See Differences of the Remix for the details on where I got some of these items.
I made the trays to be able to be slid into the command zone as a box to make the whole thing easily stored. I also added magnet holes so you may glue in magnets to hold the trays inside when not in use. the holes are for small round magnets (magnet hole is 1mm x 3mm aka .04in x .12in)