Shop Vac Hose End Replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a piece to replace a damaged hose male end on a ~2-1/2" shop vac hose. It's sized to fit inside a 54mm ID on…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 28
- Makes
- 0
- Views
- 234
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
This is a piece to replace a damaged hose male end on a ~2-1/2" shop vac hose. It's sized to fit inside a 54mm ID on the hose end and it has a 57mm OD for the replacement male end. Wall thickness is 1.8mm on both halves.
Video on YouTube: https://youtu.be/S4c6SeHACio
Print Settings
Printer Brand:
Type A Machines
Printer:
Type A Machines 2015 Series 1
Rafts:
No
Supports:
No
Resolution:
0.3mm
Infill:
100%
Notes:
Printed at 0.6mm width, with 3 layer thickness for a solid part. In ABS, I noticed some shrinkage, so I scaled X and Y by 102% for a snug fit. Every 1% scale change gives ~0.5mm change in diameter.
Post-Printing
Print a bit oversize and sand to fit
I cleaned off the remnants of the old hose end and then sanded the ID of the hose end to fit the repair adapter and glued that in place with some Shoe Goo. I also sanded the OD of the adapter to remove the layer ridges and make a nice snug fit into the vacuum tools.
Designed in Fusion 360.
Category: Replacement Parts