ZB206+ Battery Discharger mounting tab
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple mounting tab for 1 or more of the ZB206+ cell discharger modules. It has a pair of hex recesses that…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 79
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a simple mounting tab for 1 or more of the ZB206+ cell discharger modules. It has a pair of hex recesses that allow the ~4.5mm hex standoffs on the bottom of the module to press into. Then the tab can be screwed or glued down to a surface.
YouTube video of the assembly and wiring: https://youtu.be/P0Bi1Sfmc4I
Print Settings
Printer Brand:
Type A Machines
Printer:
Type A Machines 2015 Series 1
Rafts:
No
Supports:
No
Resolution:
0.3mm
Infill:
12%
Notes:
May need to flip the part over so the flat side is down for printing. Scale up or down a few percent X/Y to adjust the hex standoff fit in the tab if needed.
Post-Printing
None required
How I Designed This
Autodesk Fusion 360
Category: Electronics