Rc plane back gear-wheels taildragger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple tail wheel with rubber band for suspension
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 126
- Makes
- 0
- Views
- 531
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I made a simple wheel for my rc plane that I am building. It is a taildragger, so two wheels in the forward and one in the back. I added two hooks for rubber band so it has a little suspension. The hole for the wheel is made to be used with a paper clip and the pivot point is ment to have a nail (2.15 mm) through. The gear is on the smaller size but you can just scale it up. But don't forget, that the holes are also going to become bigger.
I printed it on my elegoo neptune 3 pro and I think I used (I am using cura slicer):
layer height 1.5
walls 1.25
top/bottom 1.25
infill 15-25
supports tree but on some parts of the model I used support blocker to not waste material.
Hope you enjoy it!