Rc plane back gear-wheels taildragger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple tail wheel with rubber band for suspension
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 126
- Wydruki
- 0
- Wyświetlenia
- 531
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I made a simple wheel for my rc plane that I am building. It is a taildragger, so two wheels in the forward and one in the back. I added two hooks for rubber band so it has a little suspension. The hole for the wheel is made to be used with a paper clip and the pivot point is ment to have a nail (2.15 mm) through. The gear is on the smaller size but you can just scale it up. But don't forget, that the holes are also going to become bigger.
I printed it on my elegoo neptune 3 pro and I think I used (I am using cura slicer):
layer height 1.5
walls 1.25
top/bottom 1.25
infill 15-25
supports tree but on some parts of the model I used support blocker to not waste material.
Hope you enjoy it!