Light Switch Hanger For Duplex Switch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Light Switch Hanger For Duplex Switch, has 2 key holders and a shelf
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 27
- Makes
- 0
- Views
- 166
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Files to Print:
1x Main_Body_LightSwitch
1x Switch Hat
2x Key_Attachment
2x Key_Attachment_pt2
2x Key_Attachment_Cover
You need 2 10mm M3 for the key_attachments (Sizes up to 14mm work)
For the top and middle bolts you need 2 20mm M3.
You will also need 2 M3 Nuts that embed into the key attachments.
Make sure you assemble the key attachments and afix them to the main plate before mounting to the wall.
The Main Body should be printed where the large plate is on the buildplate. You can choose to use organic supports to support the screw holes but its not required, it just looks cleaner.