1 / 26
MiniPC Full Case with SSD, Optional extra NIC
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Added spots for SSD + 2.5Gbe Adapter
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 33
- Makes
- 0
- Views
- 965
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
Print with PETG or other material that is more temperature resistant, at least for the Top piece, since it is hit by the fan exhaust.
In the slicer (Cura), I set Top/Bottom Layers to 0, Infill Multiplier to 2, and Extra Walls to 2. Should let the fan breathe without issue.
4x M3 heatset inserts.
4x M3 x 18-24mm long screws
Rubber feet from Home Depot
This is for the used Datto ALTO 3 V2 that I sell. Should work with ASUS Beebox or Intel NUCs with similar hole pattern and layout.