Wendigo Hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.99 – €2.43 net (excluding VAT)
For file: Wendigo3h47mCS.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.21 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 3.11 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Hueforge wendigo print
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 14
- Makes
- 0
- Views
- 305
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
Wendigo drinking coffee.
Was designed using Hueforge. You do not need a multicolor printer to make this. Just set up the slicer to pause for a filament change.
I used black, white, blue and red
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Generic Black Transmission Distance: 0.2
PLA Hatchbox White Transmission Distance: 10
PLA crealty blue Transmission Distance: 2.6
PLA crealty red Transmission Distance: 2.5
PLA Hatchbox White Transmission Distance: 10
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to White
At layer #12 (1.04mm) swap to blue
At layer #14 (1.2mm) swap to red
At layer #18 (1.52mm) swap to White for the rest.
Be the reason the forest is haunted.