Kingroon KLP1 Magnetic fan upgrade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This upgrade moves the cooling fan to the left side and makes it easily removable for quick access to the extruder gears
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 79
- Makes
- 0
- Views
- 864
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
One of the first problems I had with the KLP1 was the extruder control board blocking the door to the filament gears. This made it awkward to clear a jam in the extruder. The fan housing itself was also in the way.
This modification moves the extruder board to the front, and the fan to where the board was. The fan is held in place by magnets, so it can be easily removed to give full access to the extruder cover and gears.
You will need 6 round neodymium magnets (8mm x 2mm).
As with any fan duct, it should be printed in a high temperature material like ABS.