Counting matching models…
Tired of having the damn pen wandering around the lab lost among the tools or stuck to some frame panel so that it makes a terrible noise when the printer vibrates? This is a simple and functional design of a pen holder for the touch…
Basically a wider original duct with a vent attach to the back. It can just replace OEM part without modifying housing. Recommend to print at 0.15mm layer hight. Use only one screw to bolt on original spot. No Support Needed This desigh…
A new spool holder design which allows you to lower the filament spool mount point by 10cm ensuring correct sliding of the filament with less friction. This version has a wider hook so it is possible to insert reels of a wider thickness…
The work on the project is still in progress , for any doubts feel free to leave a comment or contact me on the Kingroon community group (user Glitch08). The goals are: -Modular design, easy to print without support and customizable. (you…
I do not own a Kingroon KLP1 by myself but a friend does. As he had issues with his filament sensor on the KLP1 and wanted to be able to connect his Drybox directly to the printer if needed, we designed this upgrade. There are several…
30mm riser for the top plate of the Kingroon KLP1. The screws to mount the riser to the frame are hidden inside, a ball head hex driver is needed. STEP files included, feel free to remix edit: added FreeCAD file edit: added 230 version…
Kingroon KLP1 Head model + Fan blower for 5015 fan replacement
Note : it does not work on the 230mm version. See the commentary section. 10/03/2025 : v8 raised version got an airflow improvement after beeing water tested v9 same airflow for non raised model. 03/05/2024 : v7 add a raised version, 7mm,…
Well just a 30mm spacer for the top (print 4) and some caps for the M3 hardware uses 20x M3x40 hex screw. And the feet , print in TPU (print 4)
A simple mod to raise the top lid. 2 versions available; for brass threaded inserts or self tapping screws. 4.5 mm diameter of holes for threaded inserts, 2.7 mm holes for self tapping. Corners are symmetric. First print 1 long piece and…
The KLP1 I bought has seems to have different parts with the KLP1 that were already here and all the fan ducts don't fit so I made one. This is for the KLP1 with 230x230mm bed with the upgraded and much larger printer head. Printed mine…
The KLP-1 has an issue where the hotend whip (cable and feed tube) drag on the lid of the printer. Also, the lid doesn't have a backstop, which is mildly annoying. There are some designs already out there to elevate the entire top of the…
On the KLP1 you have to always disassemble the hotend to reach the screws that keep the belt in place in case you want to change belts or tighten it more. This is really annoying and honestly just a bad design. So i made a belt tensioner…
The PTFE tube on the KLP1 is not held in place and is not fun to load or unload filament. This mod takes 2 2.5mm zip ties to hold the output of the FRS and a 22mm PTFE tube on the load side of the FRS. The PTFE lines up with the in/out of…
These are customized support feet printed in TPU, they greatly reduce the vibrations of the structure, I recommend re-calibrating the input shaper after installing them because they modify the resonance frequencies The correct orientation…
My print is printed from Graphene PET Printed on 2 perimeters, filling 40% with a wall height of 0.15mm. Supports are not needed
it's Kingroon KLP1 Extruder part, not for print, just to help you design. I spent almost a day measuring and modeling the klp1 extruder parts. If you need this object to help you adapt the klp1 extruder to your modification, welcome to…
When I got my KLP1 there were some problems by design. One Problem was the lower belt on the right rear side. The idler pulley is mounted too far to the left, resulting in a non-parallel belt path, resulting in different belt tension…
STOP YOUR PEI PLATE !!! NOW
Die Füße sind 40mm hoch, dadurch dreht sich der Lüfter an der Unterseite nicht mehr so hoch und wird dadurch leiser.
Print it face down, preferably in ABS (PETG might also work well). Has a weight of 13g compared to the 43g of the original metal part. Paint the /!\-Sign like I did if you like :-) You might need to drill the holes for the screws…
My design is to make the side panel of the KLP1 an openable door so that you can install the filament in the door and hide it inside the machine to retard the filament from moisture. The design of chain is designed to compensate for the…
I printed it flat on the K1 build plate with no supports, 100% infill.
Kingroon's support came through and provided me with the stl file for the KLP1 230 fan duct. Figure I upload it here to save everyone the trouble.
This is a lighter-weight replacement for the stock shroud on the KLP1 toolhead, that lets you use a standard form-factor 5015 blower fan (the OEM part has a larger port). I measured the stock shroud at 80.5 grams, and the replacement…
adaptation de la sortie ventilateur extrudeur pour adapter un 5015 standard 1-découper 4 mm aux oreilles de fixation du 5015 2-récupérer la fiche jst 2mm de l'ancien ventilo imprimé en ABS pour la température
Kingroon KLP1 230 fan duct mod for 5015 fan Print without supports
I just convert the files in stl. Edit : added config files.
Summary This is the tool holder fitted to Kingroon KLP1. Print Settings Printer brand: Kingroon Printer: Kingroon KLP1 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2mm Infill: 20% Filament brand: eSUN Filament color: White Filament…
I found the original and it was great except for the screw holes didn't line up. Maybe Kingroon changed something. Anyway, I modified this by making it thinner and moving the screw to match what is on my machine.
本模型为启庞KLP1适用的活性炭空气净化模块，同时也适用于很多其他打印机以及常规的桌面使用。需要用的到的材料有：100*100*50mm蜂窝活性炭（这在淘宝网通常可以成箱购买，价格低廉）、7530涡轮风扇、M3热熔螺母*3、M3*5螺丝*3、M3*40螺丝*2、M3螺母*2以及一个移动电源盒。 Some harmful particles could be released during the printing process, especially with…
After I uploaded my Bone-Extruder-Cover using Voronoi patterns I was asked for a clean STEP file for customization… and here it is 😉 Feel free to contact me if you find flaws or need some other improvements. Print it “face down”. The Hole…
This is 3rd attempt to fix that belt idler on Kingroon 1 makes belts not parallel. This one doesn't reduce print area, can be easily printed without support. It mounted using 2 existing screws: one to pulley mount point and one to mottor.…
Modified KLP1 lid backstop to work with (https://www.printables.com/model/612282-riser-upgrade-for-kingroon-klp1) lid riser. Simply unscrew the 4 screws holding the lid on, attach backstop, then reuse said screws to attach…
hot bed plate stoper for klp1 210. 4 screws are needed for assembly and that's it - 2x M5 2.5 - 2x M5 1.5 I made this piece because all the others I downloaded and printed had a problem with hitting the extruder head. This one has no…
EXTRUDER COVER FOR KINGROON KLP1 210 My print is printed from Graphene PET Printed on 3 perimeters, filling 40% with a wall height of 0.15mm. Supports are not needed I recommend printing from ABS, ASA, PET material. Enjoy
With this duct fan for Kingroon KLP1 230 I had a print qualaty improvement over the stok one. Printed in 0.2 layer hight. Need support just over a small part of the print.
A spoolholder to print in pairs and to add to your KLP1 (original version, not the the one with the 230x230 bed plate). Print it in PETG, ABS or any material with a good resistance for the temperature you can end up with inside the…
I originally printed and used the well constructed spool holder designed by Simone Spezzigu https://www.printables.com/model/597464-improved-spool-holder-for-kingroon-klp1, but needed something wider for a couple of older spools of…
KLP1 is a good printer and packed with nice features, Sadly the acrylic panels are tinted which make things hard to see. I made LED housing and diffuser for any 8mm LED strip, instead of buying the kit from Kingroon, you could buy a…
This pulley holder allow to make belts shorter. This will help to improve print speed and quality by redusing resonanses.
Pen plotter for Kingroon KLP1 New 2025 W.I.P. Pen plotter for klp1 210 https://www.printables.com/model/1354295-klp1-210-pen-plotter-revamped-wip Can fit any printer with 3010 fan close to the extruder! Tutorial inside the zip file!
One of the first problems I had with the KLP1 was the extruder control board blocking the door to the filament gears. This made it awkward to clear a jam in the extruder. The fan housing itself was also in the way. This modification moves…
Raise the top cover 38mm at the front and 120mm at the rear. Include the exhaust fan and filament sensor at the rear. Place the filament tube and cable on top. PLA+
The belt of the KLP1 has a lot of non-parallelism, and this design tries to solve the problem by shifting the position of the synchronizer wheel next to the right motor. The strength of the print may not be sufficient, please do not…
Your KLP1 has an ugly Z wobble? This is caused by the Z screws not being aligned and is very difficult to adjust on this machine. Welcome to the ultimate solution, wobbleX. The prerequisite for using this printable part is that you have…
Nothing much to say that wasn't in the summary, this just adapts the stock filament runout sensor on the KLP1 so you can screw in a standard pneumatic fitting. That means you can feed filament in from the back of the printer without the…
This object is meant to fix filament tube and to move the runout sensor to a more sensible place. The filament tube is fixed, so you do not need three hands to load filament anymore - now you can push the filament into the runout sensor…
Kingroon KLP1 Extruder part by lxlolxl | Download free STL model | Printables.com Used this
These fan kit models were designed for Kingroon KLP1. They can protect your 3D printer fan and make your 3D printing better. You can 3d print these models with PLA filament or PETG filament.
Everybody lowers the spool , and that makes sense , but filament sensor is not in center of spool, this print will take it a bit further to the center , not perfect , but wires is not any longer :-) uses 2x M3x35 hex bolts (40mm with some…
PL: "Potrzeba matką wynalazków" i tak powstał minimalistyczny (szybki i prosty w druku) uchwyt do kamery Logitech c270, zależało mi na prostocie a za razem na możliwości zamknięcia górnej pokrywy tak aby kamera nie kolidowała z głowica…
Oneshape part: https://dub.wfirbolg.ch/KLP1-Fan Currently printing it...
This is just a new toolhead cover I designed for use with a 5015 fan for KLP1 230. No supports 2 M3 screws 2 heatstake brass inserts 5015 fan If you are using the THR board you will need to cut and splice the original fan wire to connect…
So starting from jnorre's model, I thought I adapt it a bit to my needs, experiment with some print-in-place rollers and add a variant with a filament guide structure for an insert for a filament guide I had lying around from an old 3d…
This is another design for the cover stop. I made mine because i broke the other plus i want it a little more vertical. Print upside down without support. Category: 3D Printer Parts
KLP1 Fan mount REMIXED Updated model 2025.07.13
Summary This is the tool holder fitted to Kingroon KLP1. Print Settings Printer brand: Kingroon Printer: Kingroon KLP1 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2mm Infill: 20% Filament brand: Kexcelled Filament color: Black…
It has modeled threads for a M4 screw. So you can use the original hardware, just barely snug up or threads rip out, I also included one for an M3 threaded insert. Print face down, no supports. .2 layer height
Changed the back wall a bit. Added a mount for an aluminum ventilation hose with a diameter of 80mm and a seat for a fan 80x80x25
This is the reference size of the THR 2.0, I made it with a plastic caliper, so it may have a little variation from the real one, it is just a template not in detail, but it can serve as a reference to make some mod.
While looking for a new knob design for my 3D printer, I saw this knob designed by Roman Ulich design and immediately loved it. https://www.doorhandles-mt.com/katalog/kliky-minimal-maximal/madlo-minimal/ Adapting it for my needs, by…
****UPDATE*** Someone figured out how to flash the original MOBO and THR so this isnt needed if you dont want to switch to BTT ecosystem. I have completely gutted all of Kingroons' control boards in my KLP1 230, and replaced them with BTT…
This is a corner mounting bracket for the filament runout sensor of Kingroon KLP1. For better access at filament change or for use with a dry box. Two M3 heat inserts and two M6 push fittings, as well as a cable extender for the sensor is…
Carriage of Kingroon KPL1, version 230. Made for modding. I tried to measure it right, but some parts made on sight. If someone would like to edit to more accurate thing, I'll be appreciate)…
Adapted the original to use 6x2mm magnets instead of 8mm. Works great and the fan duct seems better than original. Might need to use heat to get magnets in if your tolerances are off.
for assembly you need 2x -3x10mm screws
NEW MOD FOR KLP1 210
Fits the KLP1 230 variant. With the oem screws and two additional M3x40 screws. Onshape: https://dub.wfirbolg.ch/fs-sp2 Update: Simplified the hole to pass the sensor cable and adjusted the alignment a bit. My first print was a bit off… I…
NOT PRINT ! JUST ONLY FOR MODING
My iteration on Wolf3D's design, offsetting the sensor to easy the filament path and still permit the use of OEM wiring
Adaptador para reemplazar el THR 2.0 de la KLP 230 por un Bigtreetech EBB42. Incluye también una modificación para el ventilador 5020 de la máquina. Lo imprimí en nailon ePA-CF debido a la alta temperatura de la cámara y su proximidad a…
I have a Kingroon KLP1 210. Didnt like the printer head. So ive made a new one. Now, it uses a Shera micro extruder mirrored: https://www.printables.com/model/1258878-sherpa-micro-romz-remix-mirrored Other extruder should be compatible,…
Filament motion sensor. Erkennt Verstopfungen sowie wenn das Filament zu ende geht. Benötigt wird: 1 Kugellager 608 ZZ 1 optischer Endstop 1 Bowdenkupplung M10 Anpassung meiner Creation für den SV06 Optional zusätzliche Bowdenkupplung M10…
Foot for Kingroon KLP1-230, 4x wall, 4x top & bottom. Need screw M8 lenght 30-40mm. Podklejone matą antywibracyjną 5mm. Foot height 15mm. After application, you do not need additional screws to secure the cover.
An additional element for a very successful mounting of the fan from this project https://www.printables.com/model/909825-klp1-extruder-fan-mount-remixed-updated Adds another holder attachment point and cable fixation for MKS THR. Add…
Print Material : ASA Recommended. PETG will do for lower temps/quick needs to print an ASA version. Remix of 2 models on makerworld. Improvements made for easier printing and/or alignment and strength. The fan was redesigned as the…
This is the reference size and holes of the Cheetah 2.2, I made it with a plastic caliper, so it may have a little variation from the real one, it is just a template not in detail, but it can serve as a reference to make some mod.
I hope this model helps you assemble the bed correctly since it's a hassle to have to remove it and not have it centered. The STL model is already ready to print on the same printer. I will also upload my profile, which has given me the…
print with settings that work best for your printer print with PETG ASA or ABS i am working on making a variant for the klp1 230 (printer cfg) [fan_generic fan2] pin: PA2 max_power: 1.0 shutdown_speed: 0.0 kick_start_time: 5.0…
projekt jest remixem
The other day, i saw the AWESOME TNTBA Anti-vibration Feet created by TryNotToBreakAnything. And i wanted to try it on my Kingroon KLP1. So, i made an adapter. The adapter should be compatible with ANY printer that uses simple round feet…
This is a mount for the 210x210 version of the Kingroon KLP1. This mounts a Logitech C270 in the back left corner. It mounts using two screws for the stepper motor and hangs beneath the belts. To route the camera cord, I cut a small slit…
Modifikation des Druckkopfes um ein BTT EBB 42 Board verbauen zu können. Zusätzlich durch die Magneten einfachere Wartung. Benötigte Teile für den Umbau: induktive Probe 5V M8 z.B. LJ8A3-2-Z/AX (orginal Probe arbeitet mit 24V wird von…
I had lots of trouble with the stock sensor so I made this from a combo of 2 existing good designs I have used in the past. It has proven more reliable but not perfect as the filament will sometimes get caught just before the exit. I…
I made this after another owner asked for the measurements on reddit. It is made from my hand measurements and crappy CAD skills so it may not be perfect. Please edit and improve if you can.
Moved the filament runout sensor to the left side for easier loading and unloading. I have a filament dryer that connects directly to the sensor. You will need to extend the wire. I used a male and female 3-pin XH-3Y and XH-3A to extend…
Frame for mounting the extruder and cutter from the Bambulab P1S onto the first-revision Kingroon KLP1 210.
Improves the filament path with the support adjustment making a less curved filament at the sensor entrance. Only need 2 screws and 3 cables jumper male-female.
A simple LED housing for KLP1 210 W.I.P. (Work in progress) This is a working prototype, it will (most likely) improve in the future. Housing for LEDs of maximum width of 85mm. For 1 euro you can get 2m/5m of cold white 5v usb LEDs on…
After purchasing the KLP1, I was unpleasantly surprised that its hotend cooler never turns off. Another downside was the inductive sensor. I had an EBB42 in my stash, which I had long wanted to use for my heavily modified Anet A8 plus,…
Work in progress. A adapter from THR board to EBB36 board. Needs modified fan shroud. EBB42 should be a better choice.
This is a side mount support for the Filament motion sensor KLP1 made by Stephan Schmitzberger. Usefull when using riser mods for the KLP1. To avoid any creep or deformation, i recommend to print in PETG or ABS, but PLA should work just…
After distroying two vertical pen holder, i create an horizontal one. It ll be fixed on the top right corner.
Overview: This is a Bowden toolhead for the KLP1 210 that uses: Dragon ACE hotend, likely also Rapido/Rapido 2/Rapido ACE HF 4010 heatbreak fan (I use a Fabreeko Honeybadger) 5015 part cooling fan (I use a West3D Berserker Vindr) Beacon H…
It so happened that I got a universal 7" HDMI touch screen with the printer, but it was without a mount and was just lying around, which was inconvenient. I also needed to monitor the long printing process and make timelapses, so I bought…
On all my printers I'm used to using tennis balls instead of a 3D printer foot. It's very convenient, sometimes even beautiful, and isolates the printer sounds from the table well. Recently I got my hands on one of the very first KLP1s…
