KLP1 spool holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Started from jnorre's spool holder and went a bit apeshit hyper-focused...
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 57
- Makes
- 0
- Views
- 490
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
So starting from jnorre's model, I thought I adapt it a bit to my needs, experiment with some print-in-place rollers and add a variant with a filament guide structure for an insert for a filament guide I had lying around from an old 3d printer. Also added a thread to the holder and a threaded key to lock in the spool. This is made to support spools from Purefil from Fabru GmbH.
Filament: Purefil BioTEC Jet Black
OnShape: https://dub.wfirbolg.ch/spool
Used @TheReverseEng_260391 M10 Hose Connector just for aesthetics https://dub.wfirbolg.ch/PC4-M10
Requires spacer to keep using the runout sensor: https://dub.wfirbolg.ch/spacer2