Filament Sensor to PTFE Tube Clamp for Kingroon KLP1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapts the stock KLP1 filament sensor to a pneumatic fitting, so you can hand-feed filament easier.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 73
- Makes
- 1
- Views
- 569
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Nothing much to say that wasn't in the summary, this just adapts the stock filament runout sensor on the KLP1 so you can screw in a standard pneumatic fitting.
That means you can feed filament in from the back of the printer without the PTFE tube getting pushed away from the sensor.
Note that the screw holes have 0.2mm thick center supports designed into the model, they should be breakaway once printing is done. Double-check in your slicer that they show up correctly, if they don't you might need auto-generated supports.
I've added a second model without those supports, if needed.
Versioning:
========
- v1 : Initial commit
- v2 : Cut off front corner for easier feeding, adjusted pneumatic fitting hole
