1 / 13
Raspberry Pi 5 case incl. slim and M.2 HAT+ version
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for a Raspberry Pi 4 Features VESA mount (75mm x 75mm) Internal fan mount (40mm x 40mm x10)
- Rating
- 5 / 5
- Likes
- 40
- Downloads
- 368
- Makes
- 1
- Views
- 1,862
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Case for a Raspberry Pi 5
### Update 2025-03-25 ###
- The power switch is integrated in the case
- New cover for the Raspberry Pi M.2 HAT+ add-on board
NEW: Alternative slim version for the new Raspberry Pi Active Cooler
Required models from Raspberry Pi 4 case, VESA mount, internal fan
- Footer pins >> rpi3-footer - optional
- Fan mount >> rpi4-fanmount - optional (Only needed if you want to cool the Pi with a internal fan (40mm x 40mm x10))
Features
- VESA mount (75mm x 75mm)
- Internal fan mount (40mm x 40mm x10) - optional
- Thread inserts (case and pi mounts)
- Additional slot for camera ribbon cable (Located over the Ethernet port)
- Access hole to on/off button or power switch integrated in the case (V2)
Print instructions
See Raspberry Pi 4 case, VESA mount, internal fan
Raspberry Pi M.2 HAT+ add-on board
Additional components are required to attach the add-on board:
- 4x M2.5x15+6 Male-Female spacer sleeves → Spacer set
- 4x M2.5x1mm Nylon flat (not necessarily required)
Slot for camera ribbon cable
Break out the cover
