Stand support for EUC Inmotion v10/v10f (only 4x phillips screws required)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified original, making sides symmetrical. The original has different dimensions on each side. Optimized for…
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 156
- Makes
- 3
- Views
- 1,094
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Modified original, making sides symmetrical. The original has different dimensions on each side.
Optimized for Inmotion V10(F) - shorter and narrower.
You can freely stretch the width of the model to fit your EUC.
You can not stretch the height of the sidewall without impacting the screw holes.
No nuts and bolts are required.
The only equipment required is 4x standard screws you can get from Ikea.
4x: 3.5mm by 30mm Phillips screws (round head)
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
0.2mm
Infill:
30%, gyroid
Filament:
Prusament PLA Black
Notes:
Both parts should be printed flat to ensure the parts are very strong.
I recommend printing it with a minimum of 4 layers of edge thickness, and an infill of at least 20-30%.
Category: DIY