Counting matching models…
A downside of the Inmotion V11 is that there's very little stable surface to mount power pads on. These fairings are meant to solve that problem. Mounted with M5 x 12mm screws, can also use up to 16mm length. Recommended to use double…
Modified original, making sides symmetrical. The original has different dimensions on each side. Optimized for Inmotion V10(F) - shorter and narrower. You can freely stretch the width of the model to fit your EUC. You can not stretch the…
materiál PLA, PETG tryska 0,4 mm vrstvy 0,3 mm ; 0,15mm pro zvýšení tuhosti použít 4 - 5 perimetrů možno použít na oba konce blatníku , nově přidaná varianta přední “08” , zadní “07” newly added variant front “08”, rear “07”
The brand you know now available to print yourself. I suggest printing walls two layers thick at 0.6 or three layers thick at 0.4. printable on MK3 I3 - best if turned to 80 degrees on plate. Strongly suggest using a strong PLA: Prusa…
Side panel for the Inmotion V11 Electric Unicycle Broke a side panel on my V11 during a crash. Was going to buy one until I saw the price and shipping times so I decided to model a replacement. Also works well as a color accent even if…
This is a stand for an Inmotion V5F (electric unicycle or EUC). I am very happy with it and I have one at home and one at work. It keeps your EUC upright so it's easier to take and put back, and it looks nicer than having it just lying on…
Replacement of broken piece. Printed with polycarbonate. There is two vesions. First one is only remodeled the original piece and the second is reinforced version with 3 holes for M2x10 to have even stronger version. I recommend redrill…
This is a no frills mount for attaching an Apple AirTag or Eufy SmartTrack Link tracker to your InMotion V12 handle. The SmartTrack is bigger by a few millimeters and the AirTag is a bit thicker by a few millimeters. That means there's a…
I've seen a few ideas like this floating around but they either require assembly, bridging, and/or support. I'm also, not a fan of unnecessary vertical curves. I printed in PLA, 4 walls, and 20% cubic. The color change is just me getting…
materiál PLA, PETG tryska 0,4 mm vrstvy 0,3 mm pro zvýšení tuhosti použít 4 - 5 perimetrů šroub imbus M10x40mm (min. 35mm)
A replacement for the original red shock cap. Modified the OEM design for more of a thumb-screw design, a bit easier to grip. This will thread on just like the original. It's a tight fit. None of the other replacements on this site were…
This mount can be used to install some M4 screws to be used as spikes for better grip. Designed for Inmotion V8F, but also should fit V8S, V10 and V10F. Use M4x12 screws, nuts and washers (12 mm diameter).
The brand you know now available to print yourself. I suggest printing walls two layers thick at 0.6 or three layers thick at 0.4. printable on MK3 I3 Strongly suggest using a strong PLA: Prusa Blend, CC3D Max, Inland Plus. Hardware: two…
Cap for the trolley of the Inmotion V12 electric unicycle. If you feel like downloading the design feel free to share an image of your print and comment what you thought
Designed specifically to pair a Kryptonite 002130 lock with an Inmotion S1 scooter. May fit other locks if the shackle diameters are the same. This is my first original 3D printing model/project, designed and iterated haphazardly on…
Specifically designed to mount CarryBright Turn Signals (ASIN B0B9XMZZWG) on an Inmotion S1 scooter. 3mm zipties necessary to attach the remote mount, either zipties of screws and bolts for the signa; holders. Optional plug to help secure…
Inmotion power button. Tested for inmotion v10f. Simple model printable with Flex filament.
This is the bottom bumper for the v14. Current model is my first attempt. Print on the chamfered bottom (your slicer will automatically pick this position if you chose auto layout). Printed in PETG in generic PETG profile on the K2 Plus
Mount for installing the Wolf King GTR headlight on the Inmotion RS. I think that this mount makes the installation a little cleaner and easier. It can be installed using the three bolts from the original RS headlight mount. The holes for…
materiál PLA tryska 0,4 mm vrstvy 0,3 mm pro zvýšení tuhosti použít 4 perimetry nutno zhotovit 2 závity M5 do původního dílu a použít - šroub imbus M5x50 - 2ks - šroub M5x10 - závitová tyč M5x155 - matka M5 - matka prodloužená M5x10 -…
This is a stand / kickstand for the Inmotion V9 Electric Unicycle [EUC]. I took a scan of the original kickstand using photogrammetry, cleaned it up a little, and made some cuts to make it look a little better that are inspired from…
a simple cup holder for my inmotion climber scooter, the post is about 1.75" deep by 1.5" across, if yours is similar it should fit. i did leave some room on the sides to add window sealing sticky padding to keep it in place and not slide…
Designed for a tight fit. Insertion into the screw well make it fit better without adhesive tape. I did not round the top for ease of printing. Used a very soft TPU (shore hardness=A75) for printing. If you use a harder TPU, you may have…
Supplement to raise the pedal tips for improved acceleration/braking and driving experience. Installation requires replacing the stock pedal bolts with longer ones. I would appreciate if you download the file to share photos of your print…
Designed for Inmotion V8F with H-5167 16x2.125 tire. May also fit V8S or V8, but not guaranteed . Tell me if you tested it with other EUCs.
When adjusted to level 3, the Inmotion RS stand legs will start to be too short. This model can be used as a temporary solution. This model was created in a rush and is usable for now. Improvements are in progress...
Inmotion V11 pedals dumper replacement. Print using TPU, 100% infill
3 Walls 15% Cubic Infill I printed L shaped laying down. The outer screw hole bridges print better facing up, but you have to use supports if you do it that way. Still experimenting
A screw for the Inmotion V12 Roll on stand reinforced using an M5-25 Bolt to strengthen the layer lines
It goes on top of rolling handle (with stock rubber one removed). Main purpose is for it to act as parking stand. Category: Outdoor & Garden
Print using a rigid material, such as ABS or PETG, and fit it on by applying a little force
Inmotion V11 pedals dumper replacement. Print using TPU, 100% infill
After one of the bolts broke, I used a bushing size 7mm, height 10mm, also fit the model from the author Honzal https://www.printables.com/model/497291-stupacky-inmotion-v10f/comments
