Inmotion V9 Kickstand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Broke your last stand? Just want another one for the front of your V9? Print this.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 18
- Makes
- 0
- Views
- 117
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
This is a stand / kickstand for the Inmotion V9 Electric Unicycle [EUC]. I took a scan of the original kickstand using photogrammetry, cleaned it up a little, and made some cuts to make it look a little better that are inspired from another design. Can be installed on front or rear.
Print settings
Minimum 4 walls (0.4mm nozzle, so 1.6mm of walls)
Minimum 20% infill
5 bottom and top layers
[Recommended] Enable Alternate Extra Wall (Orcaslicer) for infill to better connect to outer walls.
Recommended filaments
TPU-GF 67D, HT-PLA, HT-PLA-GF, PC, PC-CF, PC-GF, PCTG, PET-CF, PET-GF, Any filled Nylons (PA-6, PA12, glass, nylon), ABS, ABS-CF, ABS-GF, ASA, ASA-GF, ASA-CF.
Please note that PETG isn't listed because it's not a good filament for nearly any real-world use case. Use at your own risk. PETG Pro is slightly better if you really want to print with it.