HexiBox Series: Dozer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 2-way desktop / bookshelf speaker for use between 40Hz-20kHz.
- Rating
- 5 / 5
- Likes
- 157
- Downloads
- 1,170
- Makes
- 6
- Views
- 7,437
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution
As seen on YouTube:
Dayton Audio ND25FA-4: https://www.parts-express.com/--275-059
Dayton Audio TCP115-4: https://www.parts-express.com/--295-415
Dayton Audio XO2W-3K: https://www.parts-express.com/--260-144
Screws: https://www.parts-express.com/--081-435
Epoxy the drivers firmly into their insets. Remember to seal all 4 mounting holes around each driver. (Blu-Tack works.) Space the crossover away from the mounting rails with Blu-Tack to prevent vibration. Run a thin / wide gasket of Blu-Tack around the rear access opening before screwing the backplate in to achieve a proper seal. Input below 40Hz is NOT recommended. (Exercise caution if no high-pass filter is available.) Recommended power: 40-80W per Dozer.
Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.