1 / 2
Bear Fan Duct for the EBM Papst RLF35 — image 1
1 / 2

Bear Fan Duct for the EBM Papst RLF35

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€0.78 – €0.95 net (excluding VAT)

For file: bear_duct_papst_rlf35_0.2mm_PETG_MK3S_57m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.87 excluding VAT (range midpoint).

Weight reported by the author
10 g
Print time reported by the author
56.4 min
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Bear-compatible fan duct for the EBM PAPST RLF35-8/14N 24V fan.

Rating
0 / 5
Likes
4
Downloads
78
Makes
0
Views
883
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

I wondered, which fan-upgrade would be worth it, so I decided to take a more powerful 5015 fan - the EBM PAPST RLF35-8/14N 24V.

I remixed the original BEAR Fan duct, so credits to Bear Lab https://github.com/gregsaun/bear_extruder_and_x_axis/tree/master/source and thanks for the great shroud!

The fan duct is not optimized using software, but printing several versions and looking, how to center the air directly under the nozzle. I am pretty impressed by the results I got so far - I also reduced the fan speed for non-bridge lines. I included the Step file, so feel free to remix! Ahoo!

BOM:

  • 1 addition M3x20 screw for the right side of the fan
  • 10g filament ;)

Tags