1 / 6
Combination Wrench Holder - Multiple of Same Size - Wall Mounted
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Combination Wrench Holder - Multiple of Same Size - Wall Mounted
- Rating
- 4 / 5
- Likes
- 40
- Downloads
- 400
- Makes
- 2
- Views
- 1,473
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
SAE and metric combination wrench holder that attached to a wall with screws. There are two screws in each half so the dovetail between the two pieces is just sort of there for alignment. This is setup to hold multiple of the same size wrenches.
Note the following:
- Font does not match between the metric and SAE version. Noticed this after printing and did not plan on re-printing this just for that.
- Peg lengths on the SAE version vary in length. The Metric should all be close to the same length.
- The rod portion may is not sized to prevent smaller wrenches to be put on the peg. E.g.: A 13, 14, & 15 could all physically be placed at each others location.
- Support at the female portion of the dovetail is required.