1 / 3
T3 Fit Hair Dryer Concentrator
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement concentrator for the T3 Fit Hairdryer
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 55
- Makes
- 0
- Views
- 402
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution
Update: 2024-04-30 Uploaded a better model. It is quite tight to get in, but it stays secure.
This is a replacement concentrator for the T3 Micro Fit Hairdryer. (OEM version here)
The original is brittle and has quite a few weak spots. I wanted to make it stronger. It should just snap on to the the end of the hair dryer.
Use something like ColorFabb HT PC or better. You need something that can withstand temps around 90C without deforming
Print Settings:
- .4mm nozzle with a brim.
- .2mm layer height is fine
- Print it slow - let the layers weld
- I've printed it fine on an open and enclosed printers just fine
