Open differential for 3Dsets Jeep Rancher
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is open differential for Jeep Rancher from 3dsets.
- Rating
- 0 / 5
- Likes
- 103
- Downloads
- 384
- Makes
- 2
- Views
- 3,489
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial
This is open differential for Jeep Rancher from 3dsets. I test it on version Wagon, but should be possible to mount it also on other versions.
I created it this open diferencial, because I'm using my Rancher in house on vinyl floor and the adhesion is so good - and it overloads cardan joints.
The idea was to use maximum of original parts. For two pieces of differential you need only:
6x bearings 10X15X4 6700 2RS (same like is used everywhere in Rancher)
10x screw M3x12
and 3d printed parts
Print settings for case/box 0.2mm-20%, all other parts 0,15mm-100% infill
I printed on Prusa Mini
Assembly manual should be clear from photos.
Don't forget put in grease.
NOTE: Maybe it will be necessary to shorter Drive Shaft - Differential side, because new differential is little bit longer. On my Wagon version I did only for front axle.