dragon effector v400/SuperRacer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
remix of https://www.thingiverse.com/thing:4734896 (Other parts can also be found here) 4 walls min top/bottom 3mm…
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 39
- Makes
- 0
- Views
- 427
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
remix of https://www.thingiverse.com/thing:4734896
(Other parts can also be found here)
4 walls min
top/bottom 3mm
infill gyroid / grid
supports bottom only
known materials minimum petg
ideally abs , polycarb, petgcf , pa6
support stock probe ensure this is square to the nozzle
recommended probe (nozzle direct)
probe wire clips https://www.thingiverse.com/thing:5940041
Top cutout is for adxl
balls simply push in may need to use a screw driver to slightly adjust hole
optional loctight blue on ball stems
4010 fans screws or super glue / contact cement either will work
Hotend mount either screws and, bolts or B 3mm brass inserts x2
Note holes will need a small adjustment for inserts
current ducts wip
if needed to adjust size simply lower a bit below build plate in slicer or "plane cut"
individual duct.stl if used multiply it in slicer and, mirror.
/
Category: 3D Printing