1 / 2
DIY Enclosure for Car Melody Box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom enclosure for sound module
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 43
- Makes
- 0
- Views
- 456
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I modelled an enclosure to contain a sound module I'm using for a melody box. I can add sound bites via micro USB cable and have it play on vehicle start-up. It's powered by a USB cable plugged into a 12V socket in my car. There is a slot for the micro USB port, one to access the ON/OFF switch, a hole to pass the power cable and one to view the LED on the board. I used four M3 x 12 SHCS to fix the halves together.
This is the module I purchased: https://www.aliexpress.com/item/1005002291235297.html
0.4mm nozzle, 0.2mm layer, PETG, Sovol SV05