Smarti-tank
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is SMARS remix designed to take the Smartibot controller and motor system whilst retaining the SMARS track…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 26
- Makes
- 0
- Views
- 395
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
This is SMARS remix designed to take the Smartibot controller and motor system whilst retaining the SMARS track system.
It is still very much a work in progress as:
- the drive wheels need possibly a wee bit less taken out of the hub to reduce the required screw length to connect wheel to motor shaft.
- Mounting bracket / screw holes need to be added to the front of this so that Smartibot controller board can be properly secured. Currently it is just held in place.
A better mounting for the battery needs to be worked out. For this you will need :
1 x Smartibot kit - for the Smaritbot controller and motors.
1 x chasis
2 x drive wheels
2 x idler Wheels
32 x track segmentsYou can grab the Smartibot from here:
https://thecraftyrobot.net/collections/smartibot
Print Settings
Printer:
GEEETECH A10
Rafts:
No
Doesn't Matter
Resolution:
200
20
Filament: 3D Printz PLA Variable
Category: Robotics