Smarti-tank
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is SMARS remix designed to take the Smartibot controller and motor system whilst retaining the SMARS track…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 395
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is SMARS remix designed to take the Smartibot controller and motor system whilst retaining the SMARS track system.
It is still very much a work in progress as:
- the drive wheels need possibly a wee bit less taken out of the hub to reduce the required screw length to connect wheel to motor shaft.
- Mounting bracket / screw holes need to be added to the front of this so that Smartibot controller board can be properly secured. Currently it is just held in place.
A better mounting for the battery needs to be worked out. For this you will need :
1 x Smartibot kit - for the Smaritbot controller and motors.
1 x chasis
2 x drive wheels
2 x idler Wheels
32 x track segmentsYou can grab the Smartibot from here:
https://thecraftyrobot.net/collections/smartibot
Print Settings
Printer:
GEEETECH A10
Rafts:
No
Doesn't Matter
Resolution:
200
20
Filament: 3D Printz PLA Variable
Category: Robotics