1 / 5
Rancilio Silvia Screen Mount for OLED SSD1306 with Magnet
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rancilio Silvia Screen Mount for OLED SSD1306 with Magnet
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 47
- Makes
- 1
- Views
- 533
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
Remix of FunnyGermanGuy's remix of Laurman's Rancilio Silvia Screen Mount over on Thingiverse.
I added a bottom plate with an integrated magnet which is screwed on the top part because I didn't want to glue it on.
Top part is mostly original, just closed the opening for the cable and added two holes for heat inserts (M3 4mm x 5mm)
To insert the magnet (10x2mm) you have to stop the print at layer 16, insert the magnet and continue the print.
Needed Parts:
- 2x M3x4x5 heat inserts
- 2x M3 6mm countersunk screw
- 1x Neodymium magnet 10x2 mm
Note:
- The original part is flat with the top edge of the rim, this one is a few millimeters higher because of the magnetic bottom plate.