1 / 5
Rancilio Silvia Screen Mount for OLED SSD1306 with Magnet
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rancilio Silvia Screen Mount for OLED SSD1306 with Magnet
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 46
- Wydruki
- 1
- Wyświetlenia
- 526
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
Remix of FunnyGermanGuy's remix of Laurman's Rancilio Silvia Screen Mount over on Thingiverse.
I added a bottom plate with an integrated magnet which is screwed on the top part because I didn't want to glue it on.
Top part is mostly original, just closed the opening for the cable and added two holes for heat inserts (M3 4mm x 5mm)
To insert the magnet (10x2mm) you have to stop the print at layer 16, insert the magnet and continue the print.
Needed Parts:
- 2x M3x4x5 heat inserts
- 2x M3 6mm countersunk screw
- 1x Neodymium magnet 10x2 mm
Note:
- The original part is flat with the top edge of the rim, this one is a few millimeters higher because of the magnetic bottom plate.