1 / 8
Hygrometer / Humidity Sensor Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I bought a bunch of affordable hygrometers (CX-0726) and needed to mount them in the filament dry box
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 98
- Makes
- 1
- Views
- 1,018
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I bought a bunch of hygrometers/ humidity meter (CX-0726) and I needed to mount them in the filament dry box.
Since the hygrometers require battery change (when it runs out in the future), I decided to try design a mount for it. I mounted the mount/ holder using double-sided tape.
The mount has a catch at the top edge that will catch onto the dimple/ notch on the hygrometer. This hygrometer cost like US$1 per piece.
The hygrometer measures 43 x 43 x 11mm.
Material
- CX-0726 Hygrometer [Aliexpress]
How I printed it
- Material: PLA
- Infill: 15%
- Support: None
- Brim/ Raft: None
- Walls: 3 Layers
- Layer height: 0.20mm