1 / 6
Raspberry Pi 4 Case Pi4
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
M2.5 screws with a length of 20 mm and the corresponding nuts are required for mounting. There is space for a heat sink.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 90
- Makes
- 0
- Views
- 878
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
M2.5 screws with a length of 20 mm and the corresponding nuts are required for mounting. There is space for a heat sink.