1 / 2
SV06 ERCF Smart Filament Motion Sensor Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mount to use the ERCF Smart Filament Motion Sensor with the Sovol SV06.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 17
- Makes
- 0
- Views
- 512
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
The ERCF Smart Filament Motion Sensor is neat, and I wanted to mount it on my SV06. To this end, I designed a mount to attach it to the extruder assembly, taking advantage of existing screw holes.
I replaced the original 2x countersunk 4mm M3 screws with 2x 12mm M3 screws.
---
In a complete lack of judgement, I designed v1 of the model with built-in support for the M5 nuts, but you can just print the object laying on the opposite face instead. Thanks, brain. :)
- v1
- v2
- Uses ~20% less filament.
- Closer fit on the M5 nuts.
- Mount is no longer flush against the hotend housing, potential heat creep/transfer should be less likely.
- Arguably more aesthetic. ;)